Pac-man Kickplate Dimensions
Somewhere in the middle of studying this week, I managed to take some quick dimensions for my Pac-man kickplate. These are the dimensions I got, and will work from when designing the custom “Glob” kickplate with all of the character artwork I vectorized.
~Note / Update: The measurements I took for the bottom portion range anywhere from 18 & 5/16″ to 18 & 8/16″. I actually measured 18.375, but the total top to bottom measurement I took didn’t agree with the total added measurement of all of the objects.
For this case, I think that fraction of an inch won’t make a difference, I won’t put important artwork at the bottom. But for your own uses you might want to keep that in mind, especially if you would build your own Midway cab.
Jr. Pac-man finished!
It took me another four days of jockeying around, but I finally finished the Jr. Pac-man late late tonight.
Here is what I ended up doing…
I had some short white power coating shelf brackets from Lowe’s.
Jr. Pac-man’s in the basement ‘gameroom’
After we got back tonight, Sarah and I moved the Jr. Pac-man into the basement. Before we left on Friday the monitor connector had arrived, so the only thing left to do is put in the monitor in the cabinet.
It was really hot this weekend, after looking at the Jr. Pac cabinet closer I felt like it had warped a little bit. I had to put that out of my mind, there was nothing I could do about the cabinet now, just that much more important to get Jr. Pac inside tonight.
Jr. Pac-man was the hardest game we have moved so far. The unique Bally cabinet was just a touch wider than the base of the steps where the turn is always hard, so it took some fancy maneuvering to keep the game and walls safe and get it to the back room.
But, looks cool either way. Pretty basic and less than special when it comes to some of the gamerooms I have seen, including one this weekend, but that is going to have to do for now.
This is also the first photo with the new Ikea stools. Never liked round stools much, and after visiting Chris Moore’s gameroom this weekend, I saw a couple of different stools he had that he got from Ikea. Sarah loves the store, I had never been, so it just made sense to go and I am really happy about the choice and that I waited.
Now all I need is a real Mr. Do, a Galaga cocktail out in the main room somewhere, and, well, I’ll still sit on the pinball. I don’t even know how that would work.
Missing Monitor hookup for Jr. Pac-man
Sent payment for the Jr. Pac yesterday, so I felt comfortable asking Rick how to hook up the monitor. After a series of emails, it came out that the monitor hooks into the top of the PCB on the right side. There is another connection on the left side as well that attachs right into the harness. There was no connector on the right side, and I looked inside the game in case it came loose, wasn’t there either. So it sounds like he is going to send it to me in the mail today so I have it by Wednesday or Thursday of this week. I was really hoping to play it sometime before Friday for sure.
Plus, I had forgotten about the monitor brackets. He had mentioned that original Jr. Pac owner had taken them out with the monitor before Rick bought it. The Pac-man ones I have won’t work, just a little too short. I am going to try to go to Home Depot this week and try to find something that will match, I have read in the forums that people have found things. I also need some tinted plexi, but I am less worried about that right now…
Other info about the game…The swelling that I mistook for water damage towards the back of the cab can just be caused from heat he said. He said he sealed it off, hopefully preventing any more swelling. That makes me glad it is sitting in the garage now that it is a little cooler out. I also identified the serial no. #333, it’s stamped on the back of the cab above the back door. The Mappy serial is stamped there too. The Serial is in the cab still too on a piece of paper, A29-00333, and you can see where the old Mappy tag was on the harness.
Rick also said that the tracks that are in the bottom where the new switcher supply is are for the old linear power supply board that almost always fails in these games.
Pac-man back in downstairs living room
After I sold the R-Type today, I moved the historic Pac-man cabinet back into the main living room. I hope that in the next month I can work on it a little bit, installing the computer I have and finalizing the final details of my mame machine. It has been so long, what a nightmare. It would be nice to have it done by November, but who knows what the next few months hold.
Started scanning Jr. Pac-man marquee
I got my Jr. Pac-man game last week Thursday, and while I am waiting to pay and complete my transaction, I thought I would take the time to start scanning the marquee.
My scanner took a crap, so I had to scan the pieces of the Jr. Pac-man marquee that I could with the printer / scanner combo that a friend just gave us. But because of the control panel, I can’t scan all of the oversize marquee flat, so I will have to wait to get the middle sections scanned meaning I will have to wait to start the artwork vectorizing process.
Jr. Pac-man has arrived
It finally came on Thursday, as smoothly as planned. The truck came, they dropped off the game wrapped up tightly and well protected, they took some photos of my “gameroom” which was a small disarrayed mess, and they headed out. They didn’t want a drink, food or anything.
I will try to post some photos of it, it’s still sitting in the garage as I wait to have a little more space hopefully after Tuesday. I haven’t figured out how to hook up the monitor just yet either, but I am sure that won’t be too hard.
