Donkey Kong

Donkey Kong Deal in Indy

Strangely enough, fully working Donkey Kong arcade games don’t seem to surface all that often here in Indianapolis. Just over a week ago one popped up at a garage sale up in Nora and I was first in line to get it. (more…)

Donkey Kong Arcade Game Restoration

Donkey Kong has seen a tremendous resurgence of interest since the movie King of Kong was released. Many more people are showing interest in owning an original cabinet and keeping it in their home arcade.

Many of these cabinets will have wear and tear from 20 years of moving around from location to location and some restoration will be necessary to make your Donkey Kong look like the arcade game you remember.

Here is a photo gallery showing someone who restored their Donkey Kong (not me), converting back from a Rastan to its original Nintendo glory. From hole patching to side art placement, this photo tutorial has a lot of good information.

Feel free to leave comments with any questions, and even though it is not my machine, I will do my best to answer them. You can also visit my Donkey Kong arcade game page which contains a lot of information and resources to answer your questions.

Donkey Kong cabinet restoration – Part 1

Finding a Donkey Kong in your area should not be all that difficult. But usually, a complete working cabinet will cost $400-$450. Sometimes it makes more sense to buy a cheap cabinet and restore it. That is what this one home owner did.

This was originally a Donkey Kong cabinet that looks like it was converted to a Vs. cabinet then later converted to jamma Rastan cabinet. $60 dollars later and 3+ hours we had the cabinet home, and in the garage. As you will see, we had to do alot of filling and sanding ahead of us – The first photo is showing the cabinet converted to a Rastan and then the second shows some of the scratches and dings.

Donkey Kong Restoration Photo 1Donkey Kong Restoration Photo 2

First step, use bondo to patch all of the imperfections on all sides of our Donkey Kong cabinet, even including the back door.

Donkey Kong Restoration Photo 3Donkey Kong Restoration Photo 4Donkey Kong Restoration Photo 6

After the Bondo dried, time to sand down the sides of the cabinet.

Donkey Kong Restoration Photo 5Donkey Kong Restoration Photo 7

The front had been repainted in black at some point in its life, but it was an extremely sloppy paint job. We started to use paint stripper on the Donkey Kong and get it to a base to be repainted.

Donkey Kong Restoration Photo 8Donkey Kong Restoration Photo 10Donkey Kong Restoration Photo 11

After that we taped off the sides so we can paint black on the inside.

Donkey Kong Restoration Photo 9
Donkey Kong arcade restoration Part 2 – Primer

Coming in the next part of the tutorial, we are going to start to lay down the primer on the sides of the cabinet before we give it a fresh coat of blue!

Donkey Kong cabaret in Fishers, IN

Ha ha. This just came back on Craigslist. I was hoping it would, I missed writing about it the first time around.

The original arcade of Donkey Kong from 1981. Needs some work, but could be worth thousands$$$! Call Brad

$1,000’s you say. Well shoot, time to round up muther and head over there in the pickup to make some moolah. (more…)